Posted on Leave a comment

Novation NovaX v0.9.6 BETA available

Novation Nova editor (NovaX) beta is available now! Our development has reached a point where we were able to build it for beta testing.

Librarian functions are somewhat limited, ie. user can not store or request banks from hardware. Only performance data (all six parts and performance info) can be received and recalled on project load.
Randomizer and Section Locks are in the code, but they are not activated since we would like to focus on gathering some feedback from you.
Arpeggiator parameters are not yet built in the User Interface.

Everything else regarding to plug-in functions should be all ready to go. Once the arp editor and writing / requesting banks is fully supported, we will put up a new version.

Please note that this editor & librarian is built for Novation Nova-series only! Novation Supernova-series editor will be launched in few weeks time.

You can suggest new features, read the quick guide and report any bugs here: https://www.mysteryislands-music.com/forums/forum/novation-novax-support-channel/

Pre-order customers can download the FULL BETA version here: https://www.mysteryislands-music.com/downloads/

Product details page for demo version:

Novation NovaX AudioUnit & VST Librarian Editor Plug-in

Thanks and we hope to hear from your soon!

PS. make sure to join our newsletter again if you haven’t done so yet!

 

Posted on Leave a comment

Waldorf qXr v1.0.1 Update available

Waldorf qXr update v1.0.1 is available now. We added new things, fixed a lot bugs and we think she is ready for your disposal.

  1. Sequencer Editor – You can now edit sequence per part.
  2. Browse Sequences via Librarian – When part is selected, you can send a sequence from Patch Browser to current part when toggling “Sequence View Off” to “Sequence View On”.
  3. Improved UI – As Q has rectangular shaped edges per section, we added that in for the qXr as well. Also, phoenix colour scheme has a bit more deeper red tone in it.
  4. MIDI Clock – qXr can now send MIDI Clock to hardware from the plugin, if the switch is toggled on at MIDI Filter settings page.
  5. Advanced MIDI Settings – Block certain types of messages passing from Hardware or DAW to plugin.
  6. Category Filter – Browse presets within the range of categories by toggling on the Category Filter button in Patch Browser page.
  7. Filter Link – By toggling on the Filter Link button in Filters page, you can move filter 1 & filter 2 knobs in parallel – even if their value is not the same!

Other:

  • Check our change log for complete list of updates.

We highly recommend that you the set the Global MIDI channel to 16.

 

Download update:

https://www.mysteryislands-music.com/downloads/ after you login. :)

Check product details:

Waldorf qXr AudioUnit & VST Librarian Editor Plug-in

Thanks for supporting us and reporting any bugs you’ve found. Without your support, this would not be possible :)

Posted on Leave a comment

Clavia Nord Lead Editor Update (1,2,2x) v2.0.3

Clavia NL2xR AudioUnit & VST Editor just got a fragment better than you might expect. After the big update of VirusHC during this week, we made some ground breaking changes to our NL2xR.

Here is what we’ve done since version 2.0.0:

  • [New] About window added.
  • [New] First Run splash window. Quick instructions to user how to wire the hardware.
  • [New] Default banks are now in NL2 format, so the preset names won’t vanish when overwriting NL2 formatted bank.
  • [New] Windows installer now attempts to install in VSTPlugins/Mystery Islands Music.
  • [New] If plug-in is in performance browsing mode, regular patch request and storing functions are hidden from bank edit menu.
  • [New] If plug-in is in patch browsing mode, regular performance request and storing functions are hidden from bank edit menu.
  • [New] Added isDawRunning function in the core to check DAW status. This prevents automation from showing up on plug-in display from other than selected slot.
  • [New] Patches are now called Programs. All single programs will be stored to /User/Documents/Mystery Islands Music/Clavia NL2xR Editor/Programs/ folder.
  • [New] Performances are now stored to /User/Documents/Mystery Islands Music/Clavia NL2xR Editor/Performances/ folder.
  • [New] Program and Performance Request and Store commands moved to Bank Edit Menu and the old drop down selection menu is removed from the librarian view.
  • [Fixed] When Total Recall did not work or MIDI interface was not present, user had to reselect the MIDI I/O. This caused issue, where currently active data was requested from Nord and it overwrote the current Performance data from Plug-in.
  • [Fixed] Adjusted timeOut functions a bit further to prevent false timeOut messages.
  • [Fixed] AllSoundsOff now works as expected.
  • [Fixed] Data mode buttons now grey out when data is received to librarian.
  • [Fixed] Bank overwrite works as expected.
  • [Fixed] Part LEDs work as expected when notes or control change data is detected.
  • [Fixed] Global MIDI channel changed its value while browsing through patches from librarian.
  • [Fixed] Cancel Request button did not appear in the librarian view as it should while request process was on.
  • [Fixed] Unwanted parameters won’t display their values in controlDisplay.
  • [Fixed] Timeout and plug-in crashing the daw issues resolved while setting MIDI i/o or while requesting data from hardware.
  • [Fixed] Bank and program displays did not update while changing mode from Single to Performance.
  • [Other] Changed the way how renaming was applied to empty spaces in patch name.
  • [Other] Included NL2xR Editor UI.txt for future purposes.

To quickly summarise; move your current banks from Patches folder to Programs or Performances folder, depending which format they are. You can then remove the Patches folder as it is not used. And as usual, the update is available right now!

Full change log: Clavia NL2xR Change Log

Download Update

https://www.mysteryislands-music.com/downloads/

Learn More about NL2xR

Clavia NL2xR AudioUnit & VST Librarian Editor Plug-in

Thanks again to everyone who participate reporting bugs and suggestions. :)

Posted on 2 Comments

Access VirusHC v1.5.1 Update available

Access VirusHC update v1.5.1 is available now. We added new things, things that were highly requested.

  1. Randomizer – You can now freely randomize any part you wish.
  2. Section Locks – Compine together with Randomizer and you can keep some of the best settings of the randomized or even the current preset. If section locks are toggle on, patches sent from librarian will have your parts locked in place.
  3. Better UI – We made some small adjustment to the user interface. We know there are a lot people asking for a bigger User interface, but at this time and due the last update issues, we were not able to ship it with this release.
  4. MIDI / SysEx state LEDs per part – Now you can see per part which part is receiving data.
  5. Librarian menu improvement – You can now toggle + or – to choose next or previous bank from the dropdown list, without having to open the menu.
  6. Librarian Bank Edit Menu – revised to keep multi data and single data requests on their segments. Multi bank menu actions can be seen when Single Patches / Multi Bank Files button is toggled.
  7. The best is the last one isn’t it? Limit bank view by categories. We made our own way to display all categories in the dropdown menu. Check it out!

Other:

  • time-out issues should be resolved. In some cases, even though the cables and midi interface was ok, plug-in indicated that it was not able to make the connection.
  • Semitone should behave as expected when knob is moved from hardware.
  • and some other stuff :)

Using Randomizer and Section Locks together:

[videopress ybSJIIIu]

This short video shows how to use section locks together with randomizer function. Powerful combination and you can use section locks even when you browse presets from librarian or from hardware.

Category Filter in action

[videopress Dw3VGwYA]

You can now limit your bank view by categories. This is highly requested function so we made our own. This is better. Less clicking and selecting option back and forth. Just toggle on the filter and browse banks nicely created by the patch category statuses.

New sleek UI?

This is not yet the 4k-friendly version like we mentioned earlier. We wanted to fix living bugs first and then focus on the user interface when the core is healthy. We sure hope it is now!

Anyway, we added some new elements like part midi / sysex data indicators, took off the removable rack ears and added new button styles and some more. We will start working on the 4k and 5k user interfaces quite soon.

Download update:

https://www.mysteryislands-music.com/downloads/ after you login. :)

Check product details:

Access Virus|HC AudioUnit & VSTi Librarian Editor Plug-in

Thanks for supporting us and reporting any bugs you’ve found. Without your support, this would not be possible :) Have a great winter holidays, we are moving forward to fix more plugins and develop new ones!

Posted on Leave a comment

Happy Thanksgiving 2016! All shop products 40% OFF

Thanksgiving holiday is here and deep discounts in our store has arrived as well!

Now is your chance to grab our plugins for less. We are offering a Thanksgiving discount coupon from 25th November 2016 until 1st of January 2017 which will deduct your cart total by 40%*.

Simply add any of of the products you like in cart, view cart page and apply coupon ‘ holidayseason16 ‘ to get your discount or simply click the blue discount coupon to apply it automatically.

During next week, we are going to announce two new plugin-in products with pre-order price until the product is released. This is a great opportunity to grab the new plug-ins for less than usual. If you haven’t seen already, we announced trade-in program for ReKon Audio plug-in owners and at least one of our upcoming products can be found from their catalog. Watch out for the news!

Further info on upcoming plug-in updates:

  • Access VirusHC will be updated during next week / first week of December with a lot improvements.
  • Roland JP-80×0 fix is out soon to patch Windows platform issue where plugin is not detected by some DAWs.
  • Korg MS2KxR and Korg microKxR plug-ins reported issues will be fixed.
  • Clavia NL2xR existing features will be enhanced and we are fixing any issues that are reported.

We are looking forward to release new versions of our VirusHC, MS2KxR, microKxR and NL2xR plugins with the new improved user interface, which is 33% bigger than the old one. No more magnifying glass to use the librarian or while accessing parameters from the main editor view. This is a lot requested feature and we already applied a new user interface for our JP-80×0 plug-in.

Share the news, it will be much appreciated!

Happy Thanksgiving and holiday season to everyone from our behalf :-)

* thanksgiving coupon is exclusive and other coupons can not be used at the same time.

Posted on 1 Comment

Roland JP-8000 / JP-8080 AU & VSTi editor v2.0 announcement!

[vc_row][vc_column][vc_column_text]We’re happy to let you all know, that we have decided to take our JP-80×0 Editor plugin to another level!
We have loads of new features for version 2 to hand over, so here is a short list of what to expect:

– Velocity sensitivity controls for both, upper & lower layer knobs.
– Control Assign sensitivity controls for both, upper & lower layer knobs.
– Remote midi channel can be set
– Performance midi channel can be set
– Patch names for both upper & lower layer are now available to view and edit.
– Performance / patch data librarian window, to send, receive and store your own patches. You can also scroll thru the single patch files in librarian and choose to load them on upper or lower layer. You can also drag content between the two lists and then save your file over the old one, or create a new favorites bank.
– Initialized patch and performance banks to start creating your own favorite patches / performances.
– Send (store) entire bank to hardware
– Request entire bank from hardware

Here is a link to check out the photos of the new features.

In a meanwhile, you can purchase our version 1.1.8 here. version 2.0 update will be free for existing users!

Release scheduled between March / April 2014[/vc_column_text][vc_raw_html]JTNDaWZyYW1lJTIwd2lkdGglM0QlMjI4NDAlMjIlMjBoZWlnaHQlM0QlMjI0NzMlMjIlMjBzcmMlM0QlMjJodHRwcyUzQSUyRiUyRnd3dy55b3V0dWJlLmNvbSUyRmVtYmVkJTJGdVRmMnpHMDNTMTQlMjIlMjBmcmFtZWJvcmRlciUzRCUyMjAlMjIlMjBhbGxvd2Z1bGxzY3JlZW4lM0UlM0MlMkZpZnJhbWUlM0U=[/vc_raw_html][/vc_column][/vc_row]

Posted on Leave a comment

JP-80×0 v1.1.8 Mac & PC release

We are proud to announce that our JP-80×0 editor plugin is now available for Windows users as well!

You can download the demo from here.

We have tested our VST plugin in Cubase 32-bit and Reaper 64-bit systems so we can ensure it works for your DAW.

Mac version got also updated to v1.1.8 which includes minor bug fixes.