Configure Pulse for our plug-in

This topic contains 0 replies, has 1 voice, and was last updated by Jani 2 weeks, 1 day ago.

  • Author
  • #48148


    Instructions what to do before inserting our plug-in to project

    First we need to make sure the hardware is ready to communicate with the software. In order to do so, we need to make sure that some pre-required settings are set accordingly.

    Plug your MIDI cables to the MIDI device and Audio Jacks to your mixer / soundcard.
    MIDI out from synth to MIDI device in and vice versa. No MIDI thru or other ports.

    Fire up your Pulse / Pulse+. Our plug-in is designed to work “out of the box” and control all parameters from single plug-in instance.

    After Pulse is powered up, enter Global settings and apply following settings.

    • Global MIDI chan = we prefer to set this at channel 1.
    • Device ID = 0.

    All set! We are now ready to configure our DAW!

    To get more information about how to adjust your synth, read the Waldorf Pulse / Pulse+ User Manual.

    Put your setup details in the signature to help us understand your setup, thank you!

    Access Virus C & Virus TI2, Clavia Nord Rack 2 & Nord Rack 3, Roland JP-8000 & JP-8080, Novation Nova, Supernova Rack, Supernova 2 Rack, UltraNova & KS-Rack, Waldorf Q Rack, microQ, Pulse + & Blofeld SL, Korg MS2000R, Radias & microKorg, Yamaha AN1x, AN200, CS6x + PLG150-AN & EX5, M-Audio Venom, 3x UA Apollo Quad, Satellite Quad, PoCo x8, MOTU micro lite, 2x Emagic AMT8, MacPro 6,1

You must be logged in to reply to this topic.