Help Center

Configure Korg microKorg for our plug-in

Configuration Knowledge Level

Configuration articles and guides for software and hardware. These settings are mandatory unless otherwise stated

Instructions what to do before inserting our plug-in to project

First we need to make sure the hardware is ready to communicate with the software. In order to do so, we need to make sure that some pre-required settings are set accordingly.

Plug your MIDI cables to the MIDI device and Audio Jacks to your mixer / soundcard.
MIDI out from synth to MIDI device in and vice versa. No MIDI thru or other ports.

Configure Korg microKorg for our plug-in

Fire up your microKorg and enter MIDI settings with “EDIT SELECT 2” knob.

Set MIDI CH for your microKorg as you wish – just remember what it is when launching our plug-in.
Set LOCAL to OFF if you control your microKorg sound engine via master keyboard.
Set CLOCK to Ext if you don’t plan to use the arpeggiator. Arpeggiator work only when microKorg receives MIDI clock data.

NOTE: Switch the CLOCK to Ext mode always when transferring data from plug-in to hardware and vice versa!

Configure Korg microKorg for our plug-in

Hold down the SHIFT key and press the 4 key – Display indicates FLT.

  • Enable program change: Turn knob 1 until display says P-E.
  • Enable control change: Turn knob 2 until display says C-E.
  • Enable System Exclusive: Turn knob 4 until display says E-E.

Exit this view by clicking shift – Display returns to normal state.

Configure Korg microKorg for our plug-in

Hold down the SHIFT key and press the 8 key – Display indicates utP.

  • Disable Write Protect: Turn knob 1 until display says oFF.

Exit this view by clicking shift – Display returns to normal state.

You might have to adjust the write protect setting each time you power-up your microKorg, so check that time after time to make sure it is oFF.

All set! We are now ready to open our plug-in in DAW!

To get more information about how to adjust your synth, read the Korg microKorg User Manual.

0
0
89
Rate this article

Spread the word with your community ❤️ Thank you!

0 Shares
Tweet
Share
Reddit
Share
Share
Happy New Year - Use coupon HAPPY2021 in cart or checkout page!  Shop Now!
close
open