plug-ins-introduction

Have you tested out, how cool it is to connect and control your Hardware Synthesizer right at your favourite DAW?

This modern VSTi era, makes some of us to forget the hardware synths we used to love so much. For this reason, we have created AudioUnit and VST compatible Editor & Librarian plug-ins for Access Music, Waldorf, Roland, Clavia, Novation and Korg to name a few.

It is time to connect your beloved synth into your DAW with Total Recall, Full automation support, patch management without hardware limitations, and with a clear intuitive user interface which makes programming easy.

How it all works?

Swipe off the dust and wire up!

  1. Connect MIDI in and out from your synthesizer to your MIDI interface.
  2. Connect Audio cables from your synthesizer to your mixing console, soundcard or any summing device.
  3. Install our plug-in, you have few options to choose from. See them further below!
  4. Open your DAW, insert our plug-in to a instrument track.
  5. Set MIDI I/O from the plug-in window.
  6. Click Patch Browser / Librarian page and click "Sync Data From HW" to get the current set into the plug-in user interface.
    (note to Windows users: disable midi in and out from your DAW settings before inserting our plug-in!)
  7. DONE!

We have written deeper tutorials to our Knowledge Base, if you can't establish a successful connection. Usually some of the hardware settings needs a bit adjusting, but thats all.

DEMO LIMITATIONS

  • Automation is not visible in your DAW.
  • Librarian functions like storing presets is not working.
  • Total Recall is not available.

DEMO DOWNLOADS

Demo downloads are available at each products page with extra details about the current product.

All of your products come with 32 and 64 bit installers for macOS and Windows. macOS 10.6 and UP & Windows XP and UP supported.