Roland JP-80×0 AudioUnit & VSTi Librarian Editor Plug-in
Roland JP-80×0 AudioUnit & VSTi Librarian Editor Plug-in is the first and the only plug-in to control your Roland JP-8000 / JP-8080 right from your DAW. With JP-80×0, you can work with your Roland JP-8000 / JP-8080 by the same way you use your VSTi and AudioUnit plug-ins. JP-80×0 will recall your patch settings when you open your project and the data will be sent to your JP-8000 / JP-8080 automatically once you open your project. The only thing you need to worry, is that you power-up your JP-8000 / JP-8080 synth. This plug-in is great even if your JP-8000 / JP-8080 is broken = knobs & sliders not working.
Since there are a lot of great software synthesizers in the markets today and because they are so fast to use, we wanted to bring this functionality to every producer out there with JP-80×0 plugin and Roland JP-8000 or JP-8080. It is now much faster to scroll thru patches, make edits within your DAW. The best part is, when you reopen your project, you don’t have to worry about the patch data you had on your synth while producing: Our plugin stores all the data within the project and when you reopen the project, all of the used data gets sent to your hardware, automatically! No more saving, loading or transferring patch data. Welcome total recall.
- Control your JP-8000 or JP-8080 directly from your DAW.
- Automate almost every parameter directly from your DAW.
- No need to remember CC’s for each knobs / per synthesizer. Goodbye sticky notes!
- Load, Edit and Store patches into hardware memory or in your HDD personal library.
- Randomize upper or lower layer or both!
- Store any JP-8000 / JP-8080 compatible soundset in your HDD library folder and browse it from our plugin.
- Send banks or individual patches from librarian to hardware.
- Request banks or individual patches from hardware to librarian.
- Total Recall: When you reopen your project, all of the data used in it, will be sent to the hardware, automatically!
Check Specifications tab for more info about the plug-in capabilities.
Setting everything up
It is very easy to setup our plugin and to start using in your productions. Just follow the steps below and you can’t go wrong. Check our forums for more guidance and troubleshooting.
- Fire up your DAW and head to settings.
- Make sure MIDI input from the terminal used with your synth is disabled or adjust a filter in settings to disable CC and SysEx messages passing through.
- Load our JP-80×0 Plugin and select appropriate MIDI terminals from the upper right corner where your JP is connected. Only MIDI in and out, KBD input is not supported.
- Plugin is now ready to receive and send data to your JP-8000 or JP-8080.
Fire up your JP-8000 or JP-8080 and click shift+5 to edit MIDI parameters (edit->5 in 8080).
Check parameters below and make sure they match:
- Rx Exclusive SW : ON
- MIDI Thru : OFF
- Tx/Rx Edit SW : ON
- Tx/Rx Edit Mode : MODE1
- JP is now ready to communicate with our plugin. If not, check Device ID and set it to 17. Enjoy!
|DAW MIDI filtering:
It is important to filter hardware MIDI messages coming from the JP-8000 / JP-8080 to avoid double processing the messages. Double processing happens when message is first received via the plug-in MIDI interface and then again from DAW MIDI interface.
MIDI in Windows environment does not support recourse sharing (in most cases), so you would have to disable the MIDI ports from DAW anyway.
More info in our MIDI message filtering thread with Videos.
Check Downloads tab for detailed Synthesizer settings.
Realistic Bi-directional Graphical User Interface
Our GUI design is made to make everything from sound design to patch editing as smooth as possible. When you move a slider, push a button or twist a knob in your hardware, software will respond at appropriate layer/part. All the edits are stored within the project, so once the project is opened up again, Total Recall will send the data to hardware automatically.
Performance & Patch mode management
Roland JP-80×0 comes with ability to control Upper or Lower layer from the plug-in. This means, you can have a lush supersaw patch on Upper layer and a feedback osc guitar like lead on Lower layer if you wish. You can send patches from Librarian Browser to your selected Layer. Click LOWER on PANEL SELECT section and double click a patch on the librarian to send the patch on selected layer. Click UPPER on PANEL SELECT section to send another patch for current layer.
Check Tutorials tab for more info about using the librarian.
Automating parameters in DAW
|With FULL version of Roland JP-80×0 plug-in, you can automate almost every parameter right from your DAW without having to remember all of the CC’s.
To do this simply, put your DAW automation to write mode and twist a knob. Automation lane should appear and you can then freely adjust the automation with your mouse.
SysEx parameters will not appearing in the automation list, due to the message data size being sent to hardware. This could eventually choke the MIDI interface stream and cause unwanted effects.
Check Tutorials tab for more info about working with DAW automation.
What you CAN do with our Roland JP-80×0 plug-in:
- Connect your Roland JP-8000 and / or JP-8080 directly with your DAW using MIDI.
- Edit almost every parameter of your synthesizer from our plug-in.
- Automate almost every parameter in your DAW.
- Plug-in user interface reacts to hardware knob & buttons movements.
- Edit both layers from the plug-in individually or link layers together.
- You can request through JP’s User, Preset and Memory Card** data within the plug-in librarian.
- You can send the patches from the plug-in to your synthesizers Temp memory buffer OR you can write user memory slots through our plug-in.
- JP-8000 incompatible parameters marked with **.
- Knob & button values are sent to hardware.
- View & edit performance name in plug-in interface .
- Request current patch from selected slot to librarian.
- Request all patches from selected bank to librarian.
- Store currently selected patch from librarian to hardware.
- Store current patch bank from librarian to hardware.
- Request temp performance data to librarian.
- Request current performance from selected slot to librarian.
- Request all performance data from selected bank to librarian.
- Store currently selected performance data from librarian to hardware.
- Store current performance bank from librarian to hardware.
- Load any midi / sysex patch or performance bank to librarian.
- Browse performance & patch banks within plugin librarian.
- Load currently selected performance data to plugin memory.
- Load currently selected performance bank to plugin memory.
- Load selected single patch to selected performance slot (upper / lower).
- Software stores last used performance data with plug-in to it’s memory.
- Software loads last used performance data with project load and sends it to hardware.
- Organize performance data in librarian and save a new performance bank to hard drive.
- Organize patch data in librarian and save a new patch bank to hard drive
- Send performance data to hardware from plugin by using white user interface buttons.
- Request performance data from selected bank to plugin white buttons memory (8×8=64 slots).
- Option to scroll thru hardware programs without sending performance / patch data to hardware.
- View & edit upper / lower part patch name.
- View & edit upper / lower part velocity sensitivity levels.
- View & edit upper / lower part control assign sensitivity levels.
- More knobs & buttons now reacts to hardware knob / button movements.
- Select performance midi channel.
- Select remote kbd midi channel.
- Randomize either layer or both!
What our plug-in can NOT do:
- Transmit any audio. You have to plug your Synthesizers audio jacks into your mixer in order to hear the sound.
- JP-8080’s Voice Modulator parameters are not available at the present time.
- External Audio inputs are not controllable at the present time.
- You can not remotely start and / or shut down your Synthesizer.
Operating system specified settings / limits:
Since Windows platform CAN NOT share resources between applications, it is important that you disable the MIDI input and output from your DAWs settings which you are intending to use with our plugin. If you leave the port open, our plugin will see it and once you click to use it, it WILL crash your DAW and you will lose your data. Check our tutorials for videos and documents to get everything working properly!
macOS works “out from the box” with resource sharing, you are good to go once you insert the plugin into your DAW. However, our plugin can cause you a MIDI loop if you leave the port open / unfiltered from your hardware to your DAW. You can set various filters in your DAW. (please refer to your DAW manual how to do it).
- Roland JP-8000 or Roland JP-8080 Synthesizer.
Roland JP-8000 | Roland JP-8080
- MIDI interface (cheap interfaces & RME MIDI ports will not work).
- macOS 10.6 or later with AudioUnit or VST host.
- Windows XP or later with VSTi 2.4 compliant host.
- at least 1500×757 pixel resolution on your display.
What you get up on purchase:
- Mystery Islands Music JP-80×0 Editor & Librarian plugin for macOS and Windows platforms. AudioUnit and VST included for both, 32 and 64 bit DAWs.
- Personal activation key, which is downloadable from “My Account” page after purchase.
- Full access to free updates, which can be downloaded from “Downloads” page or Downloads tab after purchase.
- Mystery Islands Music “JP-80×0 Always Alive” Soundset included.
- Alan Marcero “JP-80×0 Trance Set” Soundset included.
- Roland JP-8000 / JP-8080 Preset Banks included.
- As long as you have purchased valid license from our store, you are entitled to support and updates for life-time.
- Our support & knowledge base can be accessed here: https://help.mysteryislands-music.com/
Check our online user guides from our forums at https://help.mysteryislands-music.com/kb/product/roland-jp-80×0-editor-librarian-plug-in/
…or check the videos below!
Windows & macOS: Download and Install our plug-in (Access VirusHC used in video)
Windows & macOS: Configure MIDI setup and routing in DAW
macOS: Insert and configure Roland JP-80×0 AudioUnit plug-in with Logic Pro X
PC: Insert and Configure Roland JP-80×0 VST plug-in with Cubase Pro
macOS & PC: Using the Roland JP-80×0 plug-in librarian and other Features
Do you accept Refunds?
Since we deliver digital download product with lifetime license, refunds are only given at the discretion of the management. You should download the DEMO first to give it a go and read our guides through properly.
Does this plug-in generate sound?
Not at the moment. You can only control the real synthesizer with our plug-in.
In future, there might be PRO upgrades available, which will eliminate the need of the hardware completely and our plug-in works as a regular VSTi / AudioUnit / AAX instrument plug-in.
What are the plug-in requirements?
You need the real hardware synthesizer which the editor is made for. If PRO upgrade is available, hardware is not required.
List for requirements:
- You need the real hardware synth, which the editor is made for.
- 32/64-bit AudioUnit / VST host for Mac or PC.
- MIDI interface. A good one which supports SysEx messages. Don’t buy anything which is less than 50€.
- Direct MIDI in / out connection between your synth and the MIDI interface. No MIDI Thru connections or MIDI in only / MIDI out only connections.
- Audio cables from the synth to soundcard or mixer in order to hear the sound.
- At least 1600×1024 pixels resolution.
Why my DAW crashes when I set MIDI in / out from the plug-in?
Be sure to follow our User Guides to setup your DAW environment properly before using our plug-ins.
Which functions are not available in the DEMO version?
- User can not save requested data from synthesizer to HDD.
- User can not store patches from librarian to synthesizer.
- Total Recall is disabled. This means, your last used plug-in settings will not be sent to your synthesizer up on loading the project.
- Plug-in parameters are not visible for DAW to automate.
- Demo version can not be registered.
Can I transfer my license to someone else or include it when I sell the synth?
No. Once you purchase the license for the plug-in, you are solely entitled to lifetime support for the plug-in. It does not make sense to us, that once you sell the license, we would have to start supporting a new “client”.
Can I use my license on multiple computers?
Yes as long as the computer is yours. If we get support requests made with your license, by someone else than you, your license will be deleted.
Do I need a internet connection to activate the plug-in?
No, you can purchase the plug-in license from our store and download the license.key and full installers and bring them to your offline computer for setup.
I just purchased the plug-in, where can I download the license?
Click My Account and navigate to Orders tab. Once you are there, click on the order which contains the license for our plug-in and download from there.
How do I add the license.key for the plug-in to register?
license.key needs to be located in /user/documents/mystery islands music/”plug-in name”/ in order to register. Reload your project or plug-in instance in order to validate.
Why plug-in says reload license after copying license to right folder?
Plug-in has failed to locate the proper file or the license check failed. Make sure the license is called “license.key” in the plug-in folder and not “license.key.txt”. If you see .txt appended, rename the file to “license.key” and try to validate again.
Where is the plug-in User Manual located?
We do not ship / deliver PDF or printer version of your documentary. You can find all the Online User Guides from our Support Site.
* UPDATE * We will start to ship How To manual series with our products in 2020.
Why plug-in displays DEMO version after purchasing the license?
You need to download and install FULL version of the plug-in in order to register it. Check next question for instructions.
Where can I find the FULL version installer?
Click Downloads or the product Downloads tab after purchase. Your FULL version installers should appear there.
Do I need to remove the DEMO before installing FULL version?
No. FULL installer will overwrite the DEMO version from your harddrive.
If I place pre-order for upcoming plug-in product, will I have access to beta version?
Yes. We will provide beta version of your product as soon as possible.
Is the pre-order charged upfront or at release date?
Pre-orders are charged immediately. This is a great opportunity for you to save some cash before any sales take place and you will get early access to the plug-in.
Not satisfied? Leave us a question via chat or head down to our Support Forums and create a new thread!