Posted on 2 Comments

Access VirusHC Update v1.5.6 Available Now

Finally we made break through with Access VirusHC Update version 1.5.6!

It was long in the makes, but we are very happy with this release. First of all, it should not crash (fingers crossed eh?). Well, we were not able to bring it down any more. Anyway, here is the list of changes:

Version 1.5.6 / 2018-09-15

  • [Fixed] Resolved issue where Pitch, Aftertouch and other controls were not passed through the plug-in.
  • [Improvement] Made some minor core changes to make the MIDI stream work a bit more light weight.

Version 1.5.5 / 2018-09-15

  • [New] Added experimental MIDI clock generator AND advanced MIDI filtering options to VirusHC plug-in. Advanced MIDI settings can be accessed from Multi Mode & Patch Browser tabs. Button appears right above our logo in the bottom right corner.
  • [Fixed] Resolved issue where FX was not recalled properly on pre-TI models after project was opened.
  • [Fixed] Tempo data should now synchronize with Virus on project recall and while initializing plug-in.
  • [Fixed] Resolved issue where DAW would crash when resetting all notes.
  • [Fixed] Adjusted some MIDI out detection booleans to make sure MIDI connection is alive.

Below you can see how the new Advanced MIDI Settings view looks like.

And the location of the Advanced MIDI Settings button (bottom right corner).

Read More about Access VirusHC Editor & Librarian plug-in: https://www.mysteryislands-music.com/product/access-virushc-audiounit-vsti-editor-librarian-plug-in/

Read More about the Changes in this release version: https://www.mysteryislands-music.com/forums/topic/access-virushc-change-log/

Use the forum to report any bugs found! This will be the last major update to the VirusHC until we have our new GUI ready. New GUI is 1500×757 pixels, so if you find anything from this version which would require a fix, please let us know asap :)

Posted on 2 Comments

Access VirusHC v1.5.1 Update available

Access VirusHC update v1.5.1 is available now. We added new things, things that were highly requested.

  1. Randomizer – You can now freely randomize any part you wish.
  2. Section Locks – Compine together with Randomizer and you can keep some of the best settings of the randomized or even the current preset. If section locks are toggle on, patches sent from librarian will have your parts locked in place.
  3. Better UI – We made some small adjustment to the user interface. We know there are a lot people asking for a bigger User interface, but at this time and due the last update issues, we were not able to ship it with this release.
  4. MIDI / SysEx state LEDs per part – Now you can see per part which part is receiving data.
  5. Librarian menu improvement – You can now toggle + or – to choose next or previous bank from the dropdown list, without having to open the menu.
  6. Librarian Bank Edit Menu – revised to keep multi data and single data requests on their segments. Multi bank menu actions can be seen when Single Patches / Multi Bank Files button is toggled.
  7. The best is the last one isn’t it? Limit bank view by categories. We made our own way to display all categories in the dropdown menu. Check it out!

Other:

  • time-out issues should be resolved. In some cases, even though the cables and midi interface was ok, plug-in indicated that it was not able to make the connection.
  • Semitone should behave as expected when knob is moved from hardware.
  • and some other stuff :)

Using Randomizer and Section Locks together:

This short video shows how to use section locks together with randomizer function. Powerful combination and you can use section locks even when you browse presets from librarian or from hardware.

Category Filter in action

You can now limit your bank view by categories. This is highly requested function so we made our own. This is better. Less clicking and selecting option back and forth. Just toggle on the filter and browse banks nicely created by the patch category statuses.

New sleek UI?

This is not yet the 4k-friendly version like we mentioned earlier. We wanted to fix living bugs first and then focus on the user interface when the core is healthy. We sure hope it is now!

Anyway, we added some new elements like part midi / sysex data indicators, took off the removable rack ears and added new button styles and some more. We will start working on the 4k and 5k user interfaces quite soon.

Download update:

https://www.mysteryislands-music.com/downloads/ after you login. :)

Check product details:

Access VirusHC AudioUnit & VSTi Librarian Editor Plug-in

Thanks for supporting us and reporting any bugs you’ve found. Without your support, this would not be possible :) Have a great winter holidays, we are moving forward to fix more plugins and develop new ones!

Posted on Leave a comment

Access VirusHC v1.4.13 Update Available

Access VirusHC, our Access Virus Editor has been updated to version 1.4.13. This is our last update with the small user interface. Next update will be version 2.0.0 if there isn’t any small bugs in this. We did do the debugging on this one with Virus C and Virus TI, with each parameter individually modified and sent to hardware for comparison. Continue reading Access VirusHC v1.4.13 Update Available

Posted on 1 Comment

Access Virus|HC v1.1.0 Update out now!

access-virus-hc-v110-update

Virus|HC AU / VSTi plug-in update v1.1.0
Fully integrated!

Since December 2014, we have come a long way with our Virus|HC plugin and its updates. This new update is a major release, which you should download and update as soon as possible!

Whats new?

Well the biggest addition could be that we added “VirusTI” functions to our plugin. Saying that, VirusTI user arp editor can’t be added, because it is impossible for us to debug the USB data flow.

If someone knows how we / or someone else could investigate USB cable data flow between the Virus and computer, let us know!

Additions and fixes since v1.0.6

  • [New] Manual has been completely re-written and it can be view from either product page, plug-in updates page or you can find it from your HDD where you installed it.
  • [New] Modulation Matrix and LFO slots updated if model selection is VirusTI.
  • [New] Rest of the known VirusTI controls added and data being parsed to the UI when changing patches.
  • [New] Value display now shows knob, menu, button “value” in screen based on the controller AND current #cc value inside -characters.
  • [Fixed] Filter link switch didn’t work as supposed under certain Virus models.
  • [Fixed] Patch names can be only 10 characters long in the displays.
  • [Fixed] Removed “Select MIDI Ports” notification popup due to the fact that it was annoying
  • [Fixed] Under some conditions, processing data window did not appear.
  • [Fixed] Reduced graphics cpu load.
  • [Fixed] Incoming multi data was skipped after parts data was processed prior to last update.
  • [New] Updated librarian graphics to meet the patch numbering from hardware. Now counts from 0 to 127.
  • [New] Added Virus|TI Oscillators 1 & 2 with their knobs, menus etc.
  • [New] Added Virus|TI Reverb functions to the plugin.
  • [New] Graphics updated to included buttons, menus and switches for new features.
  • [New] Added Virus|TI Mod Matrix destinations for all slots that were missing.
  • [New] Added Virus|TI Envelope 3 & Envelope 4 knobs to the user interface. They can be viewed by selecting different envelope from menu.
  • [Fixed] Improved incoming MIDI data transmission over the plugin to the hardware.
  • [Fixed] Some controls (amp release, lfo1 rate, lfo2 rate) didn’t respond to incoming midi messages.
  • [Fixed] Delay / Reverb settings and knobs didn’t work as supposed, when adjusting knob from hardware.
  • [Fixed] When Lfo 1 osc 1 & 2 link was on, link didn’t work when osc 2 knob was moved.
  • [Fixed] When Lfo 2 filter 1 & 2 link was on, link didn’t work when filter 2 knob was moved.
  • [Fixed] Oscillator 1 & 2 Semitone values displayed wrong value on plugin interface when knob was moved from hardware.
  • [New] Override Patch Tempo button in settings #2 tab now fetches tempo information from your host and overrides the current tempo of the hardware. If tempo is changed after setting MIDI I/O from the plugin, original tempo data is intact. Reload either MIDI in or MIDI out port from plugin interface to update Virus tempo info.
  • [New] User can now scroll thru hardware memory per part from the previous / next buttons. Current bank selection from plugin selects same bank from hardware. User can also scroll thru the library when “control library from midi / hw” is enabled as announced in v1.0.5 update.
  • [Note] In Apple Logic, program change commands that come in from channel 1 won’t be sent towards any plugins. This means that you have to use your master keyboard on a different channel in order to manage librarian / hardware memory with it

Virus|HC product page

Posted on 11 Comments

Plug-ins + future developments

[vc_row][vc_column][vc_column_text css_animation_speed=”faster” css_animation_delay=”0″]We think it’s safe to announce, that we aim to develop our successful AudioUnit & VSTi plug-ins (mac & pc) for the following synthesizers in near future. We can’t give you any specific dates for individual plug-ins, but here is the list and a little status update from where we are now:

– Access Virus series (in development)
– Korg MS2000 series (partially in development)
– Clavia Nord 3 series (partially in development)
– Clavia Nord 2 series
– Waldorf Blofeld series
– Waldorf Q-series
– Novation Supernova series
– Novation KS series
– Korg Radias

The list is not in a order of future release plan as we don’t have one yet. Our vision for the upcoming release schedule would be somewhere between 2-3 months / per plug-in and we will open pre-orders for all of the plug-ins as we announce them.

We have announced Virus|HC plug-in for Access Virus series synth early April 2014 and there is 29 days left to pre-order the plug-in now and save 25€. Roland JP-80×0 plug-in was released one year ago and as we have experienced, it’s been doing very well and our customers are happy with using it :)

Shop: Access Virus|HC plug-in | Roland JP-80×0 plug-in

We are also wondering here, is there anyone who would like to see our plug-ins in RTAS format? Any thoughts, please share :)[/vc_column_text][vc_tabs size=”large” css_animation_speed=”faster” css_animation_delay=”0″][vc_tab title=”Roland JP-80×0″ tab_id=”1399030486237-1-9″ icon=”none”][vc_single_image image=”5522″ alignment=”center” img_link_target=”_self” css_animation_speed=”faster” css_animation_delay=”0″ img_size=”full”][/vc_tab][vc_tab title=”Access Virus|HC” tab_id=”1399030521522-2-10″ icon=”none”][vc_single_image image=”5535″ alignment=”center” img_link_target=”_self” css_animation_speed=”faster” css_animation_delay=”0″ img_size=”full”][/vc_tab][vc_tab title=”Korg MS2KxR” tab_id=”1399030558323-3-2″ icon=”none”][vc_single_image image=”5531″ alignment=”center” img_link_target=”_self” css_animation_speed=”faster” css_animation_delay=”0″ img_size=”full”][/vc_tab][/vc_tabs][vc_text_separator title=”Other updates” align=”align-center” margin=”10″ css_animation_speed=”faster” css_animation_delay=”0″][vc_column_text css_animation_speed=”slower” css_animation_delay=”100″]We are also happy to let you know that we made a huge pile of updates to our storefront to make the buying experience better.

1. You can now pay your purchases with 2checkout, paypal and direct bank transfer. Direct bank transfer usually takes 2-5 business days to clear and when it’s ok, we will release your purchase.

2. When you click on your shopping cart, you can see a little coupon at the right side of the website. Don’t hesitate to use it ;) The coupon can’t be viewed if you checkout directly from product page.

3. Product Enquiry – It is now possible to send us a question about our products, directly from the product page.

4. Multiple currencies – Our shop now automatically detects your location (country) and shows our price in your local currency format. Just move the pointer over the EUR price to view your local currency :)[/vc_column_text][/vc_column][/vc_row]